PRODUCTS


> COMMERCIAL AUDIO


UAP – DSP Audio Processor

Product Number: UAP


Designed for commercial applications, the UAP G2 is the new DSP expandable universal audio processor for medium paging and multi-zone audio routing applications. With its powerful audio digital signal processing, the UAP G2 can easily be used in a demanding environment for high audio quality with advanced 24 bit A/D and D/A converters, together with the 48/96 kHz capable audio processing guarantee an excellent sound quality with the lowest possible latency. Using the Ethernet port, it is easy to connect and control the UAP G2 through an IP network or direct from a PC.


Read More Order Inquiry


Description

Designed for commercial applications, the UAP G2 is the new DSP expandable universal audio processor for medium paging and multi-zone audio routing applications. With its powerful audio digital signal processing, the UAP G2 can easily be used in a demanding environment for high audio quality with advanced 24 bit A/D and D/A converters, together with the 48/96 kHz capable audio processing guarantee an excellent sound quality with the lowest possible latency. Using the Ethernet port, it is easy to connect and control the UAP G2 through an IP network or direct from a PC.

*UAP G2 Input/Output

UAPG2InOut
04 In 12 Out412
08 In 08 Out88
12 In 04 Out124
16 In16
16 Out 16

Features

  • Free DSP architecture
  • CAT5 and fiber optic redundant audio networking capabilities
  • Support to connect up to 12 UAP G2 units
  • Highly flexible input and output configurations
  • Internal processing of audio signals can be fully programmed to suit the client’s application
  • Excellent sound quality (24 bits, 48 KHz and 96 KHz sampling)
  • Impressive array of signal processing tools
  • Easy to use PC software for system design and control (GUI)
  • Advanced Preset manager
  • Message Player
  • Scheduler and event management
  • 16 control iputs & 8 logic outputs (GPIOs)
  • 2.4 Gflops DSPs
  • Latency < 1 msec
  • Up to 16 remote devices (PPM and/or URC) per UAP G2
  • RS232 serial interfacing for 3rd party control

     

Specifications

Electrical

  • Power supply:
    • AC: 100 to 240 VAC 50/60 Hz
    • DC: 21-28 VDC
  • Power consumption: 40 VA, 10VA in standby mode.

Audio Inputs

  • Audio input impedance: 10k Ohms (symmetrical, screw terminal).
  • Input sensitivity: 0 dB, -12dB, -24 dB,-40 dB, -55 dB (software selection).
  • Max input: +15 dBu.
  • Bandwidth: 20 Hz to 20 kHz.
  • Phantom power: 48VDC / 14mA
  • Audio output impedance: 100 Ohms (symmetrical, screw terminal).
  • Bandwidth: 20 Hz to 20 kHz
  • Max output: +15 dBu.
  • Total Harmonic Distortion: < 0.03% , +0 dBu,  20~20 kHz, unity gain.
  • S/N: (84 dB), unity gain 84 dB, 22 Hz/22 kHz BW.
  • S/N: (116 dB, (54 dB gain), 22 Hz/22 KHz BW.

Serial Connections

  • RS232 port: for third party equipment remote control.
  • RS485 port: PPM paging console and URC remote controller data control.
  • RJ45 Ethernet port: for PC control and system setup.

Digital Link

  • One RJ45 TX to send data and audio to next UAP G2.
  • One RJ45 Rx to receive data and audio from the previous UAP G2.

Control Outputs

  • 8 common rail contact outputs.
    Note: You cannot choose between NO and NC.

Control Inputs

  • 16 logical inputs or analogue inputs: 0 to 5 VDC (software selection).

Mechanical

  • Dimensions (W x H x D): 432 x 44 x 245 mm
  • Weight: 3.5 kg
  • Mounting: 19″ 1U rack
  • Colour: RAL 7016 (grey)

Contact Us

ATEÏS Middle East – Dubai (HQ)

 

LIU-1 No.10 & 11 Dubai Silicon Oasis P.O. Box 293640 Dubai U.A.E
T: +971 (4) 3262730 F: +971 (4) 3262731
E: info@ateis.ae  –  Linkedin  –  TwitterYoutube

 

ATEÏS Middle East – India

 

4th Floor, 411, V Times Square,  Sector 15, CBD Belapur,
Navi Mumbai – 400 614.
Tel:- +91 22 4968 7447