PRODUCTS


>


DPA Series

Product Number: DPA


The DPA is a digital power amplifier with extremely low power consumption (0.2W per channel) during standby mode, and high amplification efficiency of 90%. A four-step DIP switch can be configured to enable/disable the function of standby mode (power-save mode) when powered by AC mains; to request the LEDs on the front panel to comply to EN54-16; and to enable/disable the battery monitoring.


Read More Order Inquiry


Description

Digital Power Amplifier

The DPA is a digital power amplifier with extremely low power consumption (0.2W per channel) during standby mode, and high amplification efficiency of 90%. A four-step DIP switch can be configured to enable/disable the function of standby mode (power-save mode) when powered by AC mains; to request the LEDs on the front panel to comply to EN54-16; and to enable/disable the battery monitoring.

 

 

 

The amplifiers are powered by 100 VAC ~ 240 VAC 50/60 Hz or 48 VDC battery backup. Each model has the line inputs with individual volume gain, status LEDs (power, battery, fault, general fault, overload and signal) on the front panel, and the DPA models can bridge two channels to double the power wattage.

Features

  • Class-D amplification performance and energy-efficient design
  • Universal switch mode power supply with PFC (Power Factor Correction)
  • Full protection circuitry against over/under AC voltage, overload, overheat, short-to-ground or short circuit on speaker lines
  • Four models available: DPA8060 (60W x 8CH), DPA4125 (125W x 4CH) and DPA4250 (250W x 4CH) and DPA2500 (500W x 2CH)
  • Support bridging two channels to double the power wattage
  • Airow cooling by internal speed fan (temperature controlled)
    Applicable for full scale of system applications: hotel, railway, airport, houses of worship, educational and sports fac ilities, club etc.

Specifications

Electrical

  • AC pwoer input: 100 VAC ~ 240 VAC, 50/60 Hz
  • Power consumption (AC)

modelidle1/2 full powerfull power
DPA806042VA365VA705VA
DPA412534VA340VA650VA
DPA425038VA660VA1300VA
DPA250028VA700VA1320VA

 

* Idle: pilot tone -36 dB
* 1/2 full power: alarm tone


  • Power consumption (DC)
  • DC pwoer input: 43 VDC ~ 56 VDC

modelstandby modeidle1/8 full power1/2 full powerfull power
DPA80602W35W92W330W635W
DPA41250.7W30W85W305W585W
DPA42500.7W34W165W595W1170W
DPA25000.7W25W175W630W1180W

 

 

* Idle: pilot tone -36 dB
* 1/8 full power: speech
* 1/2 full power: alarm tone


  • Amplifier outputs
    • EU type: 100V, 50V, 4 ohm
    • US type: 70V, 35V, 4 ohm

Audio Characteristics

  • Frequency response: 50 ~ 20 kHz (±3 dB) @ 0 dBu
  • SNR: > 90 dB
  • THD+N: < 0.1% @ 1 kHz
  • Maximum input level: 0 dBu
  • Input impedance
    • DPA2500: 10k ohm
    • DPA8060/DPA4125/DPA4250: 12k ohm
  • Crosstalk: > 70 dB @ 0 dBu gain

Mechanical

  • Dimensions (W x H x D)
    • DPA8060: 437 x 88 x 400 mm 
    • DPA4125: 437 x 88 x 370 mm
    • DPA4250: 437 x 88 x 387 mm
    • DPA2500: 437 x 88 x 387 mm 
  • Dimensions (W x H x D)
    • DPA8060: 14.8 kg
    • DPA4125: 14.5 kg
    • DPA4250: 14.5 kg
    • DPA2500: 16 kg
  • Mounting: 19″ 2U rack
  • Colour: RAL 7016

Environmental

  • Operating temperature: -5 ºC ~ +55 ºC (+23 ºF ~ +131 ºF)
  • Storage temperature: -40 ºC ~ +70 ºC (-40 ºF ~ +158 ºF)
  • Relative humidity: 20 % to 95 %
  • Air pressure: 600 to 1100 hPa
  • Heat dissipation
    • DPA8060: 767 BTU/hr
    • DPA4125: 512 BTU/hr
    • DPA4250: 1024 BTU/hr
    • DPA2500: 1092 BTU/hr

Applications

Contact Us

ATEÏS Middle East – Dubai (HQ)

 

LIU-1 No.10 & 11 Dubai Silicon Oasis P.O. Box 293640 Dubai U.A.E
T: +971 (4) 3262730 F: +971 (4) 3262731
E: info@ateis.ae  –  Linkedin  –  TwitterYoutube

 

ATEÏS Middle East – India

 

4th Floor, 411, V Times Square,  Sector 15, CBD Belapur,
Navi Mumbai – 400 614.
Tel:- +91 22 4968 7447