PRODUCTS


> PUBLIC ADDRESS-VOICE ALARM

Controller – IDA8C-SW (Switch Mode)

Product Number: IDA8C-SW


IDA8C(Switch Mode) controller requires less number of amplifiers with only 4 audio channels for 4 amplifiers and utilizes with a maximum capacity of 1000 W for each. The AteÏs local-net can be a network of one controller and a maximum up to 31 Slave units including IDA8C(Switch Mode) and IDA8C(Matrix Mode) in a local system. IDA8SAB (Switch Mode) provides the zones and audio in & out expansion using a secured 48 channel audio and data network over CAT5 or fiber optic. IDA8SAB(Switch Mode) requires less number of amplifiers with only 4 audio inputs/outputs from amplifier.


Read More Order Inquiry


Description

IDA8C(Switch Mode) controller requires less number of amplifiers with only 4 audio channels for 4 amplifiers and utilizes with a maximum capacity of 1000 W for each. The AteÏs local-net can be a network of one controller and a maximum up to 31 Slave units including IDA8C(Switch Mode) and IDA8C(Matrix Mode) in a local system. IDA8SAB (Switch Mode) provides the zones and audio in & out expansion using a secured 48 channel audio and data network over CAT5 or fiber optic. IDA8SAB(Switch Mode) requires less number of amplifiers with only 4 audio inputs/outputs from amplifier.

 

 

 

 

 

IDA8C-SW/IDA8SAB-SW supports up to 4 sources including Evac/Voice/Music/Backup. Each zone can be routed to one of the system’s audio channels. The four channels can be switched ON/OFF in each zone separately. In case of Evacuation, the three channels can be used as a second alarm channel. A IDA8C (Switch Mode) shall only require up to 4 channel amplifier and the amplifiers will act as a backup amplifier in case of other amplifiers break down.

 

 

Note: In cooperation with RU devices for redundancy purpose, please refer to our local sales for:
* External DC power calculation for IDA8S
* Special order for IDA8C, IDA8C-SW, IDA8SAB and IDA8SAB-SW

Features

Security

  • In accordance with EN54-16, ISO 7240-16 and BS5839/8, full monitored supervision from paging microphone capsule to the end of loudspeaker line.
  • Enhanced loudspeaker line surveillance for A/B zone wiring.
  • The IDA8C-SW/IDA8SAB-SW supports redundant network cabling, wired as a redundant loop.

Connectivity

  • Up to 48 simultaneous audio channels per local network.
  • Up to 256 zones in a local network, and up to 8,192 zones in a global network.
  • 4 x 1000 Watt maximum load(IDA8SAB-SW)
  • 4 channel audio distribution for EVAC, Paging, BGM & Backup.

Specifications

Electrical

  • Mains power supply
    • Voltage: 230/115 VAC ±15 %, 50/60 Hz
    • Power consumption: 48W
    • Fuse rating: 1.6A
  • Battery power supply
    • Voltage: 18 ~ 30VDC
    • Amp consumption: 1.4A

Audio Characteristics

  • Frequency response: ±1 dB @ 20 Hz and 20 kHz
  • Line inputs (optional audio input card)
    • Connector: 3 pin phoenix
    • Frequency response: ±1 dB @ 20 Hz and 20 kHz
    • SNR: > 81 dBA
    • THD: < 0.02 % @ 1 kHz
    • Input sensitivity: 0 ~ 66 dBu/6 dB steps
    • Input impedance: 10k ohm
  • Line outputs (optional audio output card)
    • Connector: 3 pin phoenix
    • SNR: >81 dBA
    • THD: < 0.02% @ 1 kHz
    • Signal: 0 dB
    • Output impedance: <100 ohm
  • Amplifier capacity (per zone): 1,000W (max.)
  • Speaker line monitoring
    • < 5 ohm (SHORT)
    • 5 ~ 5,000 ohm (Impedance value)
    • > 5,000 ohm (OPEN)

Mechanical

  • Dimensions (W x H x D): 483 x 88 x 305 mm
  • Weight: 6.2 kg 
  • Mounting: 19″ 2U rack
  • Colour: RAL 7016

Environmental

  • Operating temperature: -5 ºC ~ +55 ºC (+23 ºF ~ +131 ºF)
  • Storage temperature: -40 ºC ~ +70 ºC (-40 ºF ~ +158 ºF)
  • Relative humidity: 20 % to 95 %
  • Air pressure: 600 to 1100 hPa
  • Heat dissipation: 140 BTU/hr

Applications


 

Contact Us

ATEÏS Middle East – Dubai (HQ)

 

LIU-1 No.10 & 11 Dubai Silicon Oasis P.O. Box 293640 Dubai U.A.E
T: +971 (4) 3262730 F: +971 (4) 3262731
E: info@ateis.ae  –  Linkedin  –  Twitter – Youtube

 

ATEÏS Middle East – India

 

4th Floor, 411, V Times Square,  Sector 15, CBD Belapur,
Navi Mumbai – 400 614.
Tel:- +91 22 4968 7447