PRODUCTS


PUBLIC ADDRESS-VOICE ALARM > BATTERY CHARGERS

Secondary Unit – BTQ-SG8

Product Number: BTQ-SG8


The BTQ-SG8 PAVA secondary global unit is not only an extension unit for BTQ-VM4/8 PAVA controller but can also work independently without the BTQ-VM4/8. Up to 64 BTQ-VM4/8 or BTQ-SG8 can be networkable by full-redundancy-loop global-net via CAT5/6 cable (max. length 100m between units), multi-mode (2 km) or single-mode (20 km) fibre optic, even longer distance upon request.
The BTQ-SG8 is capable of handling 1000W speaker load per zone and 2000W max. per unit. It extends the number of input and output contacts available in the system, including 9 monitored EVAC inputs triggered either by dry contact or relay, 8 logic control inputs and 8 relay control outputs (configured by web browser). The two digital interfaces can connect up to 8 paging consoles or remote units for each, and be wired in a daisy chain or redundant loop.


Read More Order Inquiry


Description

The BTQ-SG8 PAVA secondary global unit is not only an extension unit for BTQ-VM4/8 PAVA controller but can also work independently without the BTQ-VM4/8. Up to 64 BTQ-VM4/8 or BTQ-SG8 can be networkable by full-redundancy-loop global-net via CAT5/6 cable (max. length 100m between units), multi-mode (2 km) or single-mode (20 km) fibre optic, even longer distance upon request.

 

 


 

The BTQ-SG8 is capable of handling 1000W speaker load per zone and 2000W max. per unit. It extends the number of input and output contacts available in the system, including 9 monitored EVAC inputs triggered either by dry contact or relay, 8 logic control inputs and 8 relay control outputs (configured by web browser). The two digital interfaces can connect up to 8 paging consoles or remote units for each, and be wired in a daisy chain or redundant loop.

Features

  • Both background music playing and paging can be simultaneously proceeded
  • Easy integration with Terracom, TerraManager and IP phone via SIP protocol
  • IP based music streaming and paging over LAN/WAN
  • Extremely low power consumption during standby mode (4W)
  • Volume attenuators can be installed on monitored speaker lines without loopback cable
  • Third party control via RS232 or Ethernet

Specifications

Electrical

  • DC power input: 21 VDC ~ 29 VDC
  • Power consumption
    • Full power: 15W
    • Standby mode: 4W

Audio Characteristics

  • A/D-D/A bit resolution: 24 bit
  • Sampling rate: 48 kHz
  • Frequency response: 20 Hz ~ 20 kHz (±1 dB) @ 0 dBu
  • THD+N: < 0.01 % @ 0 dB gain, 4 dBu (1 kHz) in
  • EIN: < -80 dBrA @ 0 dB gain
  • SNR: > 80 dB
  • Maximum output level: 17 dBu
  • Crosstalk: > 93 dB @ 0 dB gain, 0 dBu (10 kHz) in
  • Output impedance: 30 ohm

Wattage Capacity

  • 1000W per zone/2000W (max.) per unit

Mechanical

  • Dimensions (W x H x D): 437 x 44 x 260 mm
  • Weight: 2.6 kg
  • Mounting: 19″ 1U rack
  • Colour: RAL 7016

Environmental

  • Operating temperature: -5 ºC ~ +55 ºC (+23 ºF ~ +131 ºF)
  • Storage temperature: -40 ºC ~ +70 ºC (-40 ºF ~ +158 ºF)
  • Relative humidity: 20 % to 95 %
  • Air pressure: 600 to 1100 hPa
  • Heat dissipation: 51 BTU/hr

Applications

Compact PA/VA Solution
 
 

Large Scale PA/VA Solution
 
 

Contact Us

ATEÏS Middle East – Dubai (HQ)

 

LIU-1 No.10 & 11 Dubai Silicon Oasis P.O. Box 293640 Dubai U.A.E
T: +971 (4) 3262730 F: +971 (4) 3262731
E: info@ateis.ae  –  Linkedin  –  Twitter – Youtube

 

ATEÏS Middle East – India

 

4th Floor, 411, V Times Square,  Sector 15, CBD Belapur,
Navi Mumbai – 400 614.
Tel:- +91 22 4968 7447