The IDA8 system is a highly integrated network PA/VA system that complies with current architectural demands and IP and/or fiber-optics networking to cover for any complex design.
IDA8 is a third-generation modular PA/VA system that complies with current architectural demands requiring IP and/ or fiber-optic networking to allow for even the most complex of system designs.
IDA8 responds to Public Address and Voice Alarm requirements as stated in EN54-16, ISO 7240-16, UL60065, UL2572 and BS5839/8, with specific attributes for compliance in large installations.
The IDA8C controller houses advanced audio digital signal processing (DSP), matrix control functions and with front panel access for a fully monitored and emergency triggering buttons. IDA8C also supports amplifier monitoring with hot-swap amplifiers and loudspeaker line impedance monitoring.
IDA8C supports up to four PSS-AS monitored microphone consoles and up to eight monitored amplifiers plus two back-up amplifiers, paging into 8 different zones per unit with A/B line detection according to BS 5839 part 8. Featuring 8 monitored zones with simultaneous selection, control inputs, and contact outputs.
IDA8C provides the zones and audio in & out expansion of the IDA8 systems, using a secured 48-channel audio and data network over CAT5 or fiber optic, which can be a network of onecontroller and a maximum up to 31 Slave units via ATEÏS local-net, providing with 256 paging zones with priorities (1~99), satisfying with the most complex public address and voice alarm requirements.
|• Support up to 31 slave units in ATEÏS Local-Net|
|• Up to 256 zones via ATEÏS Local-Net|
|• 4 dedicated and monitored PDC-ports for paging consoles|
|• Powerful 4096 x 8192 security paging matrix over ATEÏS local and global network|
|• 9 supervised control inputs and 8 control outputs Simultaneous control and routing for 48 audio channels at 48 kHz sampling over dedicated network|
|• Telephone interface via SIP protocol or telephone line services|
|• Modbus Protocol interface via TCP/IP or RS485|
|• An Intuitive GUI PC software for system setup, design and remote control via Ethernet and TCP/IP connection|
|• Ethernet interface for TERRACOM, 3rd party devices, configuration, control, diagnostics and logging|
|• Advanced preset manager and event scheduler|
|• DSP functions of PEQ, GEQ, Delays, Ducker, Gate, AGC, feedback, filter, inverter, local echo suppressor, mixer|
|• Programmable 1~99 priority for 256 paging zones|
|• Digital storage for up to 100 minutes in WAV format (16k 16 bit) or 400 minutes in G.722 format for pre-recorded messages|
Hardware System Configuration
ATEÏS Middle East – Dubai (HQ)
ATEÏS Middle East – India
4th Floor, 411, V Times Square, Sector 15, CBD Belapur,
Navi Mumbai – 400 614.
Tel:- +91 22 4968 7447