PRODUCTS


    DIVA Compact PA/VA System >


    Slave Unit – DIVA-8S

    Product Number: DIVA-8S


    The DIVA-8S slave unit is an extension unit for the DIVA-8MG2 controller.It increases the number of paging zones by 8 zones for each slave unit added in the system. Up to 15 slave units can be connected to the DIVA-8MG2 controller under local network. A complete DIVA system provides up to 128 zones (A/B). The DIVA-8SG2 units are linked to the system via shielded STP CAT5/6 cable (max. length 100m).

    The DIVA-8S handles the same 1,000W capacity as the DIVA-8MG2 controller (at 100V) on each amplifier channel (music + voice). The individual music or voice channel or both channels can be manually/automatically routed zones by the settings of DIVA software. For maximum flexibility, the connected amplifiers can distribute their power across multiple slave units or additional amplifier channels can be added to the system to assist where more output power is needed. The 100V amplifier signal is simply linked to the slaves to create a 100V signal bus


    Read More Order Inquiry


    Description

     

    DIVA-8S Comptact PA/VA Slave Unit

    The DIVA-8S slave unit is an extension unit for the DIVA-8MG2 controller.It increases the number of paging zones by 8 zones for each slave unit added in the system. Up to 15 slave units can be connected to the DIVA-8MG2 controller under local network. A complete DIVA system provides up to 128 zones (A/B). The DIVA-8SG2 units are linked to the system via shielded STP CAT5/6 cable (max. length 100m).

     

     

     

     

    The DIVA-8S handles the same 1,000W capacity as the DIVA-8MG2 controller (at 100V) on each amplifier channel (music + voice). The individual music or voice channel or both channels can be manually/automatically routed zones by the settings of DIVA software. For maximum flexibility, the connected amplifiers can distribute their power across multiple slave units or additional amplifier channels can be added to the system to assist where more output power is needed. The 100V amplifier signal is simply linked to the slaves to create a 100V signal bus

    Features

    • Low cost 2 voice + music channel switching amplifier architecture (plus back-up amplifier function)
    • 9 monitored logic control inputs, 8 non-monitored logic control inputs
    • Handle up to 1,000W wattage capacity per amplifier channel
    • Loudspeaker line surveillance (short, open, bad impedance) for speaker zone wiring (A/B)
    • 1 fault relays & 1 evac relays outputs
    • 1U standard 19″ rack mounting
    • 8 logic relay contacts
    • EN54-16 certified

    Specifications

    Electrical

    • Mains power supply
      • Voltage: 230/115 VAC ± 15%, 50/60 Hz
      • Power consumption: 35W
      • Fuse rating: 1.6A
    • Battery power supply
      • Voltage: 18 ~ 30VDC
      • Amp consumption: 1.4A

    Audio Characteristics

    • Frequency response: -3 dB @ 20 Hz and 20 kHz
    • Amplifier capacity (per channel): 1,000W (max.)

    Mechanical

    • Dimensions (W x H x D): 483 x 44 x 277 mm (19 x 1.7 x 11 inch)
    • Weight: 3.9 kg (8.6 lbs)
    • Mounting: 19″ 1U rack
    • Colour: RAL 7016

    Environmental

    • Operating temperature: -5 ºC ~ +55 ºC (+23 ºF ~ +131 ºF)
    • Storage temperature: -40 ºC ~ +70 ºC (-40 ºF ~ +158 ºF)
    • Relative humidity: 20 % to 95 %
    • Air pressure: 600 to 1100 hPa
    • Heat dissipation: 120 BTU/hr

    Applications

    Contact Us

    ATEÏS Middle East – Dubai (HQ)

     

    LIU-1 No.10 & 11 Dubai Silicon Oasis P.O. Box 293640 Dubai U.A.E
    T: +971 (4) 3262730 F: +971 (4) 3262731
    E: info@ateis.ae  –  Linkedin  –  TwitterYoutube

     

    ATEÏS Middle East – India

     

    4th Floor, 411, V Times Square,  Sector 15, CBD Belapur,
    Navi Mumbai – 400 614.
    Tel:- +91 22 4968 7447