PRODUCTS


PUBLIC ADDRESS-VOICE ALARM > BATTERY CHARGERS


IDA8 – Slave Unit

Product Number: IDA8S/IDA8SAB/IDA8SL


The IDA8SAB, IDA8S, IDA8SL slave unit houses advanced audio digital signal processing (DSP), matrix control functions and a digital message player, along with amplifier monitoring with hot-swap amplifiers and loudspeaker line-impedance line monitoring. Each input and output channel is fitted with a wide range of pre-and post-processing devices such as volume controllers, routing mixers and switches, priority and paging components, equalizers, compressors, limiters and delay-lines.


Read More Order Inquiry


Description

The IDA8SAB slave unit houses advanced audio digital signal processing (DSP), matrix control functions and a digital message player, along with amplifier monitoring with hot-swap amplifiers and loudspeaker line-impedance line monitoring. It supports up to two PSS-AS monitored microphone consoles, up to eight monitored amplifiers plus two backup amplifiers and paging into 8 different zones per unit with A/B line detection (BS 5839-part 8). Featuring 8 monitored zones for 25V/70V/100V outputs with simultaneous selection, control inputs, and contact outputs. IDA8SAB provides the zones and audio in & out expansion of the IDA8 Systems, using a secured 48-channel audio and data network over CAT5/6 or fiber-optic, which can be a network of one controller and a maximum up to 31 slave units via ATEÏS local-net. Two card slots can be fitted with optional 4-channel analogue audio in/output cards 4 channel AES/EBU cards for digital audio in/out.

 

 

 

 

The IDA8S slave unit houses advanced audio digital signal processing (DSP), matrix control functions and a digital message player, along with amplifier monitoring for hot-swap amplifiers and loudspeaker line impedance monitoring. It supports up to two PSS-AS monitored microphone consoles and up to eight monitored amplifiers plus two backup amplifiers, paging into 8 different zones per unit with line detection. Featuring 8 monitored zones for 25V/70V/100V outputs with simultaneous selection, control inputs, and contact outputs. IDA8S provides the zones and audio in & out expansion of the IDA8 systems, using a secured 48 channel audio and data network over CAT5/6 or fiber-optic, which can be a network of one controller and a max. up to 31 slave units via ATEÏS local-net. Two card slots can fitted with optional 4 channel analogue audio input/outputs cards (max two cards per device).

 

 

IDA8S provides extension of IDA8 system with additional 8 output zones and 2 backup amplifiers. Each input and output channel is fitted with a wide range of pre/post-processing devices such as volume controllers, routing mixers and switches, priority and paging components, equalizers, compressors, limiters and delay-lines. Digital messaging (G.711, G.722, G.726, G.727 and WAV format) can be stored for live or pre-recorded playback. Digital audio files are uploaded from PC to the IDA8S through ATEÏS Studio software. Several messages can be played simultaneously into different zones: up to 4 messages from a single IDA8S or a total of 48 message channels across an IDA8 system (controller with slaves).

 

 

 

  

 

The IDA8SL Lo-Z slave unit houses advanced audio digital signal processing (DSP), matrix control functions and a digital message player, along with amplifier monitoring with hot-swap amplifiers and Lo-Z line monitoring. It can support up to two PSS-AS monitored microphone consoles, up to four monitored amplifiers plus one backup amplifier and paging into 4 different zones per unit with line detection. Each input and output channel is fitted with a wide range of pre-and post-processing devices such as volume controllers, routing mixers and switches, priority and paging components, equalizers, compressors, limiters and delay-lines.

 

 

Note: In cooperation with RU devices for redundancy purpose, please refer to our local sales for:
* External DC power calculation for IDA8S
* Special order for IDA8C, IDA8C-SW, IDA8SAB and IDA8SAB-SW

 

Features

Security & Connectivity

 

  • Support redundant loop network cabling.
  • Enhanced loudspeaker line surveillance for A/B zone wiring (IDA8SAB).
  • In accordance with EN54-16, ISO 7240-16 and BS5839/8, full monitored supervision from paging microphone capsule to the end of loudspeaker line.
  • Up to 48 simultaneous audio channels per local network.
  • Up to 256 zones in a local network.

 

Features

 

  • Up to 256 priorities that can be configured for up to 256 zones (512 AB) in the local network.
  • Up to 32 IDA8C with IDA8S(AB)’s over the local network, allowing a system configuration of up to 32 x 8 zones.
  • Compatibility with the VNB IP-media streamers.
  • The AteÏs -Net Secured Audio Network that is providing a Single or Multi-mode, 48 audio channels, 32bit, 48kHz, redundant network.
  • Automatic messaging in the IDA8C controller and IDA8S(AB) slave unit. The audio messages can be uploaded via Ethernet link.
  • Message player and messages monitoring.
  • Standard test, alarm and chime-tones are stored in the IDA8C controller and IDA8S(AB) slave units.
  • Cost-effective solutions using switching mode for multi-zoned amplifier usage.

Specifications

Electrical

  • 24 VDC power supply
    • Voltage: 18 ~ 30 VDC
    • Amp consumption: 1.4A

Audio Characteristics

  • Frequency response: ±1 dB @ 20 Hz and 20 kHz
  • Line inputs (optional audio input card)
    • Connector
      ◦  IDA8S: 3 pin phoenix
      ◦  IDA8SAB: 3 pin phoenix  
      ◦  IDA8SL: SPEAKON (electronically balanced)
    • Frequency response: ±1 dB @ 20 Hz and 20 kHz
    • SNR: > 81 dBA
    • THD: < 0.02 % @ 1 kHz
    • Input sensitivity: 0 ~ 66 dBu/6 dB steps
    • Input impedance: 10k ohm
  • Line outputs (optional audio output card)
    • Connector:
      ◦  IDA8S: 3 pin phoenix
      ◦  IDA8SAB: 3 pin phoenix
      ◦  IDA8SL: XLR
    • SNR: >81 dBA
    • THD: < 0.02% @ 1 kHz
    • Signal: 0 dB
    • Output impedance: <100 ohm
  • Amplifier capacity (per zone): 1,000W (max.)
  • Speaker line monitoring
    • < 5 ohm (SHORT)
    • 5 ~ 5,000 ohm (Impedance value)
    • > 5,000 ohm (OPEN)

Mechanical

  • Dimensions (W x H x D)
    • IDA8S: 486 x 44 x 285 mm
    • IDA8SAB: 486 x 88 x 289 mm 
    • IDA8SL: 486 x 88 x 300 mm
  • Weight
    • IDA8S: 4.2 kg 
    • IDA8SAB: 5 kg
    • IDA8SL: 4.2 kg 
  • Mounting
    • IDA8S: 19″ 1U rack
    • IDA8SAB: 19″ 2U rack
    • IDA8SL: 19″ 2U rack
  • Colour: RAL 7016

Environmental

  • Operating temperature: -5 ºC ~ +55 ºC (+23 ºF ~ +131 ºF)
  • Storage temperature: -40 ºC ~ +70 ºC (-40 ºF ~ +158 ºF)
  • Relative humidity: 20 % to 95 %
  • Air pressure: 600 to 1100 hPa
  • Heat dissipation: 126 BTU/hr

 

Applications

System Diagram

 

 

 

 


 

 

 

Contact Us

ATEÏS Middle East – Dubai (HQ)

 

LIU-1 No.10 & 11 Dubai Silicon Oasis P.O. Box 293640 Dubai U.A.E
T: +971 (4) 3262730 F: +971 (4) 3262731
E: info@ateis.ae  –  Linkedin  –  TwitterYoutube

 

ATEÏS Middle East – India

 

4th Floor, 411, V Times Square,  Sector 15, CBD Belapur,
Navi Mumbai – 400 614.
Tel:- +91 22 4968 7447