PRODUCTS


PUBLIC ADDRESS-VOICE ALARM > BATTERY CHARGERS


Controller – IDA8C (Matrix Mode)

Product Number: IDA8C


The IDA8C controller houses advanced audio digital signal processing (DSP), matrix control functions, a digital message player, a fully monitored fireman’s microphone and emergency message trigger buttons. IDA8C also supports amplifier monitoring with hot-swap amplifiers and loudspeaker line impedance monitoring. It supports up to four PSS-AS monitored microphone consoles and up to eight monitored amplifiers plus two back-up amplifiers, paging into 8 different zones per unit with A/B detection (BS 5839 part 8). Featuring 8 monitored zones for 25V/70V/100V outputs with simultaneous selection, control inputs, and contact outputs.

IDA8C provides the zones and audio in & out expansion of the IDA8 systems, using a secured 48 channel audio and data network over CAT5 or fiber optic, which can be a network of one controller and a maximum up to 31 slave units via ATEÏS local-net, providing with 256 paging zones with priorities (1 ~ 99), satisfying with the most complex PA/VA requirements. The two card slots are provided for either 4 channel 0 dB audio input or 4 channel audio cards. Optional AES/EBU cards are also available.


Read More Order Inquiry


Description

The IDA8C controller houses advanced audio digital signal processing (DSP), matrix control functions and a digital message player, with front panel access for a fully monitored fireman’s microphone and emergency trigger buttons. IDA8C also supports amplifier monitoring with hot-swap amplifiers and loudspeaker line impedance monitoring.

 

 

One IDA8C supports to connect to a maximum of 31 slave units via Ateis-Net. The slave units are available as single zone (IDA8S) or with A/B speaker line configurations (IDA8SAB), or for low-impedance monitoring (IDA8SL). The LCD touch screen panel on IDA8C gives the operators to see a detailed overview of the operational status of the entire systems.

 

 

 

 

 

 

IDA8C provides the zones and audio in & out expansion of the IDA8 systems, using a secured 48-channel audio and data network over CAT5 or fiber optic, which can be a network of onecontroller and a maximum up to 31 Slave units via ATEÏS local-net, providing with 256 paging zones with priorities (1~99), satisfying with the most complex public address and voice alarm requirements.

 

Note: In cooperation with RU devices for redundancy purpose, please refer to our local sales for:
* External DC power calculation for IDA8S
* Special order for IDA8C, IDA8C-SW, IDA8SAB and IDA8SAB-SW

Features

Security

  • In accordance with EN54-16, ISO 7240-16 and BS5839/8-full monitored supervision from paging microphone capsule, amplifier monitoring to the end of loudspeaker line.
  • Loudspeaker line surveillance for A/B zone wiring.
  • Support redundant network cabling, wired as a redundant loop.
  • Event logs and faults via LCD front panel or Ateis Studio software.


Connectivity

  • Up to 48 simultaneous audio channels per local network.
  • Up to 256 zones in a local network, and up to 8,192 zones in a global network.
  • Full digital with 8 audio inputs & 8 audio outputs.
  • 9 supervised control inputs & 8 control outptuts, 1 fault & 1 EVAC relay outputs.
  • 2 dedicated & monitored device ports for paging consoles.
  • Flexible used of network cards, CAT5-100M & Fiber-20km.
  • 32-bit DSP with superior A/D & D/A conversion.
  • Internal digital message memory up to 100mins in WAV format (16k 16bit) or 400mins in G.722 format.


Features

  • Front panel color touch-screen display, allowing navigation through various system menu’s. 
  • Cost-effective solutions using switching mode for multi-zoned amplifier.
  • Message player and messages monitoring.
  • Compatibility with the TERRACOM IP-media streamers.
  • Alarm and chime-tones are stored in the IDA8C and IDA8S(AB) units.
  • Full system redundancy using the IDA8RU switching devices. 

Specifications

Electrical

  • Mains power supply
    • Voltage: 230/115 VAC ±15 %, 50/60 Hz
    • Power consumption: 48W
    • Fuse rating: 1.6A
  • Battery power supply
    • Voltage: 18 ~ 30 VDC
    • Amp consumption: 1.4A

Audio Characteristics

  • Frequency response: ±1 dB @ 20 Hz and 20 kHz
  • Line inputs (optional audio input card)
    • Connector: 3 pin phoenix
    • Frequency response: ±1 dB @ 20 Hz and 20 kHz
    • SNR: > 81 dBA
    • THD: < 0.02 % @ 1 kHz
    • Input sensitivity: 0 ~ 66 dBu/6 dB steps
    • Input impedance: 10k ohm
  • Line outputs (optional audio output card)
    • Connector: 3 pin phoenix
    • SNR: > 81 dBA
    • THD: < 0.02 % @ 1 kHz
    • Signal: 0 dB
    • Output impedance: <100 ohm
  • Amplifier capacity (per zone): 1,000W (max.)
  • Speaker line monitoring
  • < 5 ohm (SHORT)
  • 5 ~ 5,000 ohm (Impedance value)
  • > 5,000 ohm (OPEN)


Mechanical

  • Dimensions (W x H x D): 486 x 88 x 313 mm
  • Weight: 5.36 kg
  • Mounting: 19″ 2U rack
  • Colour: RAL 7016


Environmental

  • Operating temperature: -5 ºC ~ +55 ºC (+23 ºF ~ +131 ºF)
  • Storage temperature: -40 ºC ~ +70 ºC (-40 ºF ~ +158 ºF)
  • Relative humidity: 20 % to 95 %
  • Air pressure: 600 to 1100 hPa
  • Heat dissipation: 153 BTU/hr

Applications

 

System Diagram

 

 

 

 


 

 

System Schematics

Contact Us

ATEÏS Middle East – Dubai (HQ)

 

LIU-1 No.10 & 11 Dubai Silicon Oasis P.O. Box 293640 Dubai U.A.E
T: +971 (4) 3262730 F: +971 (4) 3262731
E: info@ateis.ae  –  Linkedin  –  TwitterYoutube

 

ATEÏS Middle East – India

 

4th Floor, 411, V Times Square,  Sector 15, CBD Belapur,
Navi Mumbai – 400 614.
Tel:- +91 22 4968 7447